 | Year Built: 2006 |
| Forearm:
Highly Figured Birdseye Maple
 | 4 Razor sharp Ebony Points |
| Each point has 4 veneers (Black, Black, Blue,
Maple -- outside to inside) |
|
| Butt Sleeve:
Ebony
| 4 pairs of Hand Milled Elephant Ivory Dice (all
"7's") |
| 2 sets of rings consisting of long Maple
rectangles with Black, Blue, Black stitches in-between them |
|
| Ring Work:
Long Maple Rectangles with Black, Blue, Black stitches in-between
them at Locations A and B and in the butt sleeve as described above |
| Wrap:
Black/White Speck Irish Linen |
| Butt Cap: White
Linen |
| Butt
Length (w/o bumper): 29.0" |
| Butt
Weight: 16.2 oz. |
| Butt
Diameter (9" above End of Butt Cap): 1.xx" |
| Joint Type:
5/16"x14 Stainless Steel Pin, Stainless Steel Piloted Joint |
| Shaft 1: Rock Maple
w/Black Linen Joint Collar
-- NO BRASS INSERT -- Raised Maple tenon with a Dymondwood insert
(see detailed photo at the bottom of the page) -- with ring work
consisting of long Maple rectangles with black, blue, black stitches
in-between them ("A" Location)
| Length (w/tip):
29.5" |
| Weight: 3.9 oz. |
| Taper: Custom
Murrell Modified European Taper |
| Ferrule: 13.0 mm,
0.75 inch long LBM |
| Tip: Moori III
Medium (layered) w/Red Fiber Backing - dime radius |
|
| Shaft 2: Rock Maple
w/Black Linen Joint Collar -- NO BRASS INSERT -- Raised Maple tenon with a Dymondwood insert
(see detailed photo at the bottom of the page) -- with ring work
consisting of long Maple rectangles with black, blue, black stitches
in-between them ("A" Location)
| Length (w/tip):
29.5" |
| Weight: 3.8 oz. |
| Taper: Custom
Murrell Modified European Taper |
| Ferrule: 13.0 mm,
0.75 inch long LBM |
| Tip: Moori III
Medium (layered) w/Red Fiber Backing - dime radius |
|
| Overall Weight:
| w/shaft 1: 20.1 oz. |
| w/shaft 2: 20.0 oz. |
|
| Overall Length (w/o
bumper):
| w/shaft 1: 58.5" |
| w/shaft 2: 58.5" |
|
| Balance Point From the Tip:
| w/shaft 1: 39.0" |
| w/shaft 2: 39.125" |
|
| Balance Point From End of
Butt Cap:
| w/shaft 1:
19.5" |
| w/shaft 2: 19.375" |
|
