 | Specifications:
 | Year Built: 2005 |
| Forearm:
Beautifully figured Goncola Alves
 | 6 razor sharp Ebony points (3-high, 3-low) |
| Each Point has 3 Veneers (black, brown,
and maple - outside to inside) |
|
| Butt Sleeve:
Beautifully figured Goncola Alves
| 6 razor sharp Reverse Ebony points (3-high,
3-low) |
| Each Reverse Point has 3 Veneers (black, brown,
and maple - outside to inside) |
|
| Ring Work:
Large black linen rectangles separated by maple, brown, black,
brown, and maple stitches surrounded by a pair of Maple rings at
locations A, B, C, D, E and between each of the Ebony handle
segments |
| Handle:
Segmented Ebony Handle (3 segments separated by ring work
described above) |
| Butt Cap: Black
Linen |
| Butt
Length (w/o bumper): 29" |
| Butt
Weight: 15.7 oz. |
| Butt
Diameter (9" above End of Butt Cap): 1.13" |
| Joint Type:
3/8"x10 Brass Pin; Flat Faced Joint w/Black
Linen Joint Collar with Wood to Wood contact |
| Shaft 1: Rock Maple
w/Black Linen Joint Collar with ring work made up of Large black
linen rectangles separated by maple, brown, black, brown, and maple
stitches surrounded by a pair of Maple rings ("A" Location)
| Length (w/tip):
29.5" |
| Weight: 3.5 oz. |
| Taper: Custom
Murrell Modified European Taper |
| Ferrule: 13.0 mm,
0.75 inch long LBM |
| Tip: Moori III
Medium (layered) w/Red Fiber Backing - dime radius |
|
| Shaft 2: Rock Maple
w/Black Linen Joint Collar with ring work made up of Large black
linen rectangles separated by maple, brown, black, brown, and maple
stitches surrounded by a pair of Maple rings ("A" Location)
| Length (w/tip):
29.5" |
| Weight: 3.5 oz. |
| Taper: Custom
Murrell Modified European Taper |
| Ferrule: 13.0 mm,
0.75 inch long LBM |
| Tip: Moori III
Medium (layered) w/Red Fiber Backing - dime radius |
|
| Overall Weight:
| w/shaft 1: 19.2 oz. |
| w/shaft 2: 19.2 oz. |
|
| Overall Length (w/o
bumper):
| w/shaft 1: 58.5" |
| w/shaft 2: 58.5" |
|
| Balance Point From the Tip:
| w/shaft 1: 39.375" |
| w/shaft 2: 39.375" |
|
| Balance Point From End of
Butt Cap:
| w/shaft 1: 19.125" |
| w/shaft 2: 19.125" |
|
|
| Condition:
| This cue is brand new and unplayed except for a
few test balls to ensure it's soundness and playability. |
|
| Comments:
| This is another beautiful example of one of
Kenny's high-end segmented handle cues. If you like the look and
feel of a beautiful wood handle on your cue, with precision aligned
ring work from top to bottom....this might just be the right cue for
you! |
| This cue is signed and dated on the butt sleeve
and is a 1 of 1. |
| As with all of Kenny's high-end cues, this one
comes complete with the Custom Ebony/Goncola Alves Joint
Protectors (with matching ring work on the butt protector) shown in the pictures above. |
| Each new Kenneth Murrell Custom Cue that is sold
by me is guaranteed indefinitely by Kenny, to the ORIGINAL OWNER
(non-transferable) against construction defects that are not the
result of warpage or abuse. (Please note that this guarantee does
not apply to Elephant Ivory Joints and/or Ferrules due to their
inherently fragile nature). |
|
| Availability:
| Currently for Sale @ $1,250.00
-- SOLD |
| For more information about purchasing this cue
please contact me at
big.john.rea@wolfbite.com and reference Cue #25. |
| If you want more information about payment
methods, shipping charges and a host of other "boring legal stuff"
please go to the
Wolfbite Policies page. |
|
 |
|
