 | Year Built: 1996 |
| Forearm:
Ebony
 | 4 sets of 4 Large Moose Antler "Dots" in
Diamond Clusters (2-high, 2-low) |
|
| Butt Sleeve:
| The middle section of the butt sleeve from a solid piece of Moose Antler and is quite unusual. The
Butt Sleeve is smooth on one side (where Joe signed and numbered it...see
photo at the bottom of the page)
and the other side has the natural Moose Antler pattern (see photo
#1 above)....A REALLY UNIQUE PIECE! |
| On either side of the Moose Antler are large
slabs of Ebony |
|
| Ring Work:
Thin Rings of Moose Antler at locations A, B, C, D, and E |
| Wrap: Light
Green/White Irish Linen (original wrap) |
| Butt Cap: Black
Linen Phenolic |
| Butt
Length (w/o bumper): 29" |
| Butt
Weight: 16.2 oz. |
| Butt
Diameter (9" above End of Butt Cap): 1.187" |
| Joint Type:
3/8"x10 Aluminum Joint Pin; Flat Faced Joint w/Linen Phenolic Joint
Collars and Wood to Wood Contact |
| Shaft 1: Rock Maple
w/Black Linen Phenolic Joint Collar and a thin Moose Antler Ring
("A" Location)
| Length (w/tip):
29.5" |
| Weight: 3.6 oz. |
| Taper: Standard
Sanko Pro-Taper |
| Ferrule: 13.25 mm,
1" long Linen Phenolic |
| Tip: LePro
(original) - dime radius |
|
| Shaft 2: Rock Maple
w/Black Linen Phenolic Joint Collar and a thin Moose Antler Ring
("A" Location)
| Length (w/tip):
29.5" |
| Weight: 3.6 oz. |
| Taper: Standard
Sanko Pro-Taper |
| Ferrule: 13 mm,
1" long Linen Phenolic |
| Tip: LePro
(original) - dime radius |
|
| Overall Weight:
| w/shaft 1: 19.8 oz. |
| w/shaft 2: 19.8 oz. |
|
| Overall Length (w/o
bumper):
| w/shaft 1: 58.5" |
| w/shaft 2: 58.5" |
|
| Balance Point From the Tip:
| w/shaft 1:
40.875" |
| w/shaft 2: 40.75" |
|
| Balance Point From End of
Butt Cap:
| w/shaft 1:
17.625" |
| w/shaft 2: 17.75" |
|
