 | Year Built: 2003 |
| Forearm:
Highly Figured Birdseye Maple
 | 5 razor sharp Macacauba points |
|
| Butt Sleeve:
Macacauba with 2 Thick Clad Copper Rings w/Silver Edges surrounded
by Black Linen Rings |
| Ring Work:
| Single Thick Clad Copper Ring w/Silver Edges
surrounded by Black Linen Rings at Location C |
| 2 Thick Clad Copper Rings w/Silver Edges
surrounded by Black Linen Rings located at the top and bottom of
the Butt Sleeve |
|
| Wrap:
White/Green Irish Linen |
| Butt Cap: White
Linen |
| Butt
Length (w/o bumper): 29" |
| Butt
Weight: 16.3 oz. |
| Butt
Diameter (9" above End of Butt Cap): 1.135" |
| Joint Type:
3/8"x10 Stainless Steel Pin; Flat Faced Joint w/Black Linen Joint Collar with Wood to Wood contact |
| Shaft 1: Rock Maple
w/Black Linen Fiber Joint Collar
| Length (w/tip):
29.25" |
| Weight: 3.3 oz. |
| Taper: Custom
Modified Euro-Taper |
| Ferrule: 12.8 mm,
0.875" long Aegis-II |
| Tip: Moori Medium
(layered) - dime radius |
|
| Overall Weight:
| w/shaft 1: 19.6 oz. |
|
| Overall Length (w/o
bumper):
| w/shaft 1: 58.25" |
|
| Balance Point From the Tip:
| w/shaft 1: 40.45" |
|
| Balance Point From End of
Butt Cap:
| w/shaft 1: 17.8" |
|
