 | Specifications:
 | Year Built: 2005
(January) |
| Forearm:
Brazilian Rosewood with 8 points
 | 4 Razor Sharp Brazilian Rosewood long points with
Black,
Purple, Green, Blue, and Maple veneers (outside to inside) |
| 4 Razor Sharp Brazilian Rosewood short points with
Purple, Green,
Blue, and Maple veneers (outside to inside) |
|
| Butt Sleeve:
Brazilian Rosewood |
| Ring Work:
| Brazilian Rosewood Rectangles with Green, Blue,
Purple, Blue, Green veneer stitches in-between them all surrounded
by two Black Linen Rings at Locations A, B, C and D |
| Elephant Ivory Hoppe Ring surrounded by two of
the same rings described above at Location E |
|
| Handle:
Highly Figured Solid Brazilian Rosewood Handle |
| Butt Cap: Black
Linen |
| Butt
Length (w/o bumper): 29.0" |
| Butt
Weight: 14.7 oz. |
| Butt
Diameter (9" above End of Butt Cap): 1.12" |
| Joint Type:
3/8"x10 Brass Pin; Flat Faced Joint w/Black Linen Joint Collar with Wood to Wood contact |
| Shaft 1: Rock Maple
w/Black Linen Joint Collar and Maple rectangles with Brazilian
Rosewood Rectangles with Green, Blue, Purple, Blue, Green veneer
stitches in-between them all surrounded by two Black Linen Rings ("A" Location)
| Length (w/tip):
29.5" |
| Weight: 3.5 oz. |
| Taper: Custom
Murrell Modified European Taper |
| Ferrule: 13.1 mm,
0.875" long LBM |
| Tip: Moori III
Soft
(layered) w/Red Fiber Backing - dime radius |
|
| Shaft 2: Rock Maple
w/Black Linen Joint Collar and Maple rectangles with Brazilian
Rosewood Rectangles with Green, Blue, Purple, Blue, Green veneer
stitches in-between them all surrounded by two Black Linen Rings ("A" Location)
| Length (w/tip):
29.5" |
| Weight: 3.5 oz. |
| Taper: Custom
Murrell Modified European Taper |
| Ferrule: 13.1 mm,
0.875" long LBM |
| Tip: Moori III
Soft
(layered) w/Red Fiber Backing - dime radius |
|
| Overall Weight:
| w/shaft 1: 18.2 oz. |
| w/shaft 2: 18.2 oz. |
|
| Overall Length (w/o
bumper):
| w/shaft 1: 58.5" |
| w/shaft 2: 58.5" |
|
| Balance Point From the Tip:
| w/shaft 1: 38.9375" |
| w/shaft 2: 38.9375" |
|
| Balance Point From End of
Butt Cap:
| w/shaft 1: 19.5625" |
| w/shaft 2: 19.5625" |
|
|
| Condition:
| This cue is pre-owned but in PRISTINE shape with
no discernable dents or dings in either of the 2 shafts or in the
butt of this cue. |
| Only one shaft has ever seen any real action on
this cue (shaft #1), the other has only hit a few test balls. |
|
| Comments:
| Since the Exportation Ban on Brazilian Rosewood
went into effect several years ago, excellent pieces of it are
getting very hard to find, and when you can find it, the price is
"through the roof". This cue has some of the most beautiful
Brazilian Rosewood I have ever seen and Kenny has done a masterful
job of using it for maximum impact. All of the Brazilian Rosewood on
this cue came from the same piece of wood and combined with the
beautifully cut points, the very colorful veneers, the gorgeous ring
work, and of course the Elephant Ivory Hoppe ring...this cue will be
the jewel in the crown of your collection. Of course it goes without
saying that this cue plays great just like every other Kenny Murrell
cue :-) |
| As you can see from the price below, "this cue
ain't cheap", but it is a true 1 of 1 and is signed that way on the
the butt sleeve. |
| This cue also comes with a Custom set of
Brazilian Rosewood Joint Protectors...do you think I've said "Brazilian Rosewood" enough :-) ...with matching ring work on the butt protector made by
Kenny shown in the pictures above. |
|
| Availability:
| Currently for Sale @ $1,550.00
-- SOLD |
|
 |
|
