 | Year Built: Early
1980's - Model C-3 |
| Forearm:
Birdseye Maple |
| Butt Sleeve:
Birdseye Maple |
| Ring Work:
 | Large Ring of Black Bordered Maple Rectangles
bounded by 2 thick Rings of Rosewood (I think) in the Middle of
the Butt Sleeve |
| Single White Ring at Locations A and B |
|
| Wrap:
Original Gold/Black Nylon Wrap |
| Butt Cap: White
Plastic (unknown type) |
| Butt
Length (w/o bumper): 29" |
| Butt
Weight: 15.9 oz. |
| Butt
Diameter (9" above End of Butt Cap): 1.180" |
| Joint Type:
3/8"x10 Stainless Steel Pin; Flat Faced Joint w/White Linen Fiber Joint Collar
with Wood to Wood Contact |
| Shaft 1: Rock Maple
w/Black Linen Fiber Joint Collar and Single White Ring ("A"
Location)
| Length (w/tip):
29.25" |
| Weight: 3.6 oz. |
| Taper: Standard
McDermott Pro-Taper |
| Ferrule: 13.4 mm,
1.125" long Linen Based Fiber |
| Tip: LePro - dime
radius |
|
| Overall Weight:
| w/shaft 1: 19.5 oz. |
|
| Overall Length (w/o
bumper):
| w/shaft 1: 58.25" |
|
| Balance Point From the Tip:
| w/shaft 1: 39.875" |
|
| Balance Point From End of
Butt Cap:
| w/shaft 1: 18.375" |
|
