 | Year Built: 2003 -
Jump/Break Model |
| Forearm:
Rock Maple
 | 4 Light Rosewood Points |
| Tan Linen Phenolic Joint Collar (break-down for
use as a Jump Handle) |
|
| Butt Sleeve:
Red Dyed Bubinga |
| Ring Work:
| Large Maple "Stitch" Ring with Red/Blue Veneers
(between the Maple Stitches) sandwiched by two Red Veneer Rings at
locations A, B, and E |
| Single Tan Phenolic Rings at locations D and E |
|
| Handle:
Light Rosewood with a 3/8"x11 Brass Joint Pin; Flat Faced Joint
w/Tan Phenolic Joint Collar and Wood to Wood contact (for removal
when used as a Jump Cue) |
| Butt Cap: Tan Linen
Phenolic |
| Butt
Length (w/o bumper): 29" |
| Butt
Weight: 14.5 oz. |
| Joint Type:
3/8"x11 Brass Joint Pin; Flat Faced Joint w/Tan Phenolic Joint
Collar and Wood to Wood Contact |
| Shaft 1: Rock Maple
w/Tan Phenolic Joint Collar and a Large Maple Stitch Ring - see
description above ("A" Location)
| Length (w/tip):
29.25" |
| Weight: 3.5 oz. |
| Taper: Standard
Stacey Pro-Taper |
| Ferrule: 13.35 mm,
1" long Linen Fiber |
| Tip: Chandivert
Hard (layered) w/Red Fiber Pad - nickel radius |
|
| Shaft 2: Rock Maple
w/Tan Phenolic Joint Collar and a Large Maple Stitch Ring - see
description above ("A" Location)
| Length (w/tip):
29.25" |
| Weight: 3.8 oz. |
| Taper: Standard
Stacey Pro-Taper |
| Ferrule: 13.4 mm,
1" long Linen Fiber |
| Tip: Moori Medium
(layered) - dime radius |
|
| Overall Weight:
(w/shaft 1: 18 oz., w/shaft 2: 18.3
oz.) |
| Overall Length (w/o
bumper): (w/shaft 1: 58.25", w/shaft 2: 58.25") |
| Balance Point From the Tip: (w/shaft 1:
39.75",
w/shaft 2: 39.375") |
| Balance Point From End of
Butt Cap: (w/shaft 1:
18.5", w/shaft 2: 18.875") |
