 | Year Built: approx.
2000 |
| Forearm:
Long Forearm/Handle made of Beech and Birch which are dyed to
produce the unusual colors that are seen in the pictures.
These woods are then laminated using phenolic resin as both the
bonding and impregnating agent. -- The shape of the Forearm is also
quite unique to Bob Renis with the middle of the Forearm
"necked-down" such that it looks quite "flimsy", but I assure you
that it IS NOT! -- Very Unusual Cue! |
| Butt Sleeve:
see above |
| Ring Work:
 | A Single Thick Black Linen Ring (actually part
of the Joint) at Location B |
| A Single Thick Brass Ring at Locations A and B |
|
| Handle: see
above - The Handle area is "carved" and has the feel of ""finger grooves"
-- see the detailed picture of the Handle |
| Butt Cap: None (see
above) |
| Butt
Length (w/o bumper): 28.875" |
| Butt
Weight: 16.5 oz. |
| Joint Type:
3/8"x18 Brass Pin (VERY UNUSUAL); Flat faced Joint w/White Linen
Joint Collar |
| Shaft 1: Laminated
Beech and Birch that are dyed (not the same colors as the butt which
makes a very nice aesthetic contrast between the 2 sections)
| Length (w/tip):
29.1875" |
| Weight: 4.5 oz. |
| Taper: Standard
Renis Very Long Pro-Taper (in spite of the very long Pro-Taper on
this shaft, it is quite stiff) |
| Ferrule: 11 mm,
1.0625" long - 2 different Linen Fiber pieces (Longer Black Linen
Ferrule with a Short White Linen piece next to the Shoulder of the
Shaft-- i.e. bottom of the Tenon) |
| Tip: LePro - dime
radius |
|
| Overall Weight:
(w/shaft 1: 21 oz.) |
| Overall Length (w/o
bumper): (w/shaft 1: 58.0625") |
| Balance Point From the Tip: (w/shaft 1:
39.125") |
| Balance Point From End of
Butt Cap: (w/shaft 1:
18.9375") |
